MODBUS RTU to TCP, RS232/485 to Ethernet Module

(WJ102-232/485-RJ45 : Multifunctional serial server module)

Features:

>> MODNUS RTU protocol is converted into MODBUS TCP protocol automatically

>> 100M high-speed LAN, 10 / 100M adaptive Ethernet interface by itself

>> Support AUTO MDI / MDIX, you can use a crossover cable or parallel cable connection

>> RS232 baud rate can be set from 300-256000

>> Working mode selectable TCP Server, TCP Client

UDP mode, UDP Server mode

>> Supports virtual port mode

>> Can across the gateway, across switches and routers

>> Can work in LAN, you can also work on the Internet (extranet)

>> Working port, destination IP address and port can be set easily

>> Flexible serial data sub-frame is set to meet user demand for subcontracting

>> Dimensions: 120 x 60 x 43mm

Product Overview:

WAYJUN WJ102-232/485-RJ45 is a industrial protocol converter between RS232/485 and TCP/IP. This server uses the TCP port network packets or UDP packets and RS232 or RS485 interface data to achieve transparent transmission, achieve transmission, serial servers so that you can easily connect serial devices to Ethernet and Internet, Network management of serial devices. And compared to similar products, its distinguishing feature is the stability of full-duplex, non-stop sending large amounts of data without losing a byte.

Product Part No.:

WJ102 - 232/485 - RJ45

Communication Interface 2

RJ45:RJ-45 network interface

Communication Interface 1

232/485:support RS232 or RS485 interface, choose suitable

WJ102 General Parameters:

(typical @ +25 ℃, Vs to 24VDC)

Transmission Distance: RS232----15 meters

RS485-----1000m

Wires 200m (connect into the internet through the switch, unlimited distance)

CPU: 32 bits ARM CPU

Ethernet LAN: 10/100Mbps

Protection: 2KV electromagnetic isolation

Communication: Serial to Ethernet transparent transmission

It can also be set MODBUS TCP to MODBUS RTU communication protocol.

Web: support web to access module, support web setting module parameters

Interface: RJ-45 network interface, RS232 interface or RS485 interface

Power Supply: +8 ~ 32VDC wide range power supply, internal anti-reverse and over-voltage protection circuit

Power Loss: less than 1W

Operating Temperature: - 45 ~ +80 ℃

Humidity: 10 ~ 90% (no condensation)

Storage Temperature: - 45 ~ +80 ℃

Storage Humidity: 10 ~ 95% (no condensation)

Isolation Voltage: Non-isolated

Footprint Function:

Note: same name PIN interior are connected

More details,please check this download datasheet:

http://www.wayjun.net/Datasheet/Signal/WJ102%20-%20232485%20-%20RJ45%20EN.pdf

   Shenzhen WAYJUN Industrial Automation is a HI-tech company of designing, researching 4-20mA/0-5V to RS485 Data Acquisition Module,analog signal isolated converter / conditioners,Ethernet I/O Module,PT100 temperature /speed/frequency signal isolators/splitter,isolated amplifier,Digital Signal to RS485/232 Module,Min-power DC DC converters.Our products also carry the CE approval for safety.

WAYJUN's products are widely used in the industry power fields of control, electric power, electronic instrument, medical electronic, rail transit, communication, telecom, automation,Medical and Test & Measurement etc.Our products are sold all over the world.Create maximum value for customers is our constant aim.More details,please check: www dot wayjun dot net.

WAYJUN products series:
1. Remote I/O isolation module
WJ21 series -------- 4-20mA/0-10V to RS485/232 AD converter
WJ31 series -------- RS485/232 to 4-20mA/0-10V DA converter
WJ28 series -------- 8 channels 4-20mA/0-10V to RS485/232 AD converter
WJ70 series -------- 4-ch DI 4-ch relay output, RS485/232 remote data acquisition module
WJ61 series --------16-ch DI switch / dry contact signal to RS485/232
WJ62 series -------- 8-ch DI switch signal to RS485/232 remote I/O modules
WJ60 series -------- 8-ch DI 8-ch DO switch to RS485/232 remote I/O modules

2. Analog signal isolator / transmitter:
DIN35 rail-mounted
DIN11 IAP-V (A) -P-V (A) ---- photoelectric isolation signal transmitter (one in one out)
DIN12 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in two out)
DIN14 IAP-V (A) -P-V (A) ----- voltage / current signal splitter (one in four out)
DIN22 IAP-V (A) -P-V (A) ----- voltage/current signal isolated transmitter(two in two out)
DIN44 IAP-V (A) -P-V (A) ------ voltage/current signal isolated transmitter(four in four out)
WJ11 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter
DIN22 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation transmitter (two out of two)
DIN12 IAP-Z-T-P-A (V) ----------- PT100 thermal resistance temperature signal isolation splitter (one in two out)
DIN11 IAP-F-P-V (A)-----------frequency to voltage / current signal isolated transmitter
DIN11 IAP-V (A) -P-F----------voltage / current signal frequency isolation transmitter
DIN11 IAP-R-P-V (A) --------- Potentiometer /resistance signal isolated transmitter
DIN11 IAP-S-P-O-----------speed sensor signal isolated transmitter, sine waveshaping
DIN33 IAP-S-P-O------------------- encoder differential signal to pulse signal transmitter
DIN11D IAP-V (A) -P-V (A) -------- large current output signal isolator
DIN11 IAP 4-20mA------------------4-20mA passive signal isolator
DIN22 IAP 4-20mA------------------4-20mA passive signal isolator (two in two out)
DIN11 IAP 100LF-------------------- passive isolation 4-20mA signal distributor
DIN11 IAP 100LP-------------------- passive isolation 4-20mA signal conditioner
In addition, DC voltage / current signal isolators also have PCB package.